Hydrogen Peroxide 3%

Prepared and bottled in Switzerland by mychem.ch

versions

- 100 ml hydrogen peroxide 3 %, pure (H₂O₂ 35% is diluted with deionized water)
- 100 ml hydrogen peroxide 3 %, pheur (H2O2 30% is diluted with deionized water)

Formula: H₂O₂
brown glass bottle with child safety lock, tamper-evident, tactile warning symbol and drop counter.

Shelf life:

  3 %: started approx. 2 weeks

Puriss (purissimum) is a chemical quality designation. These substances are of a particularly pure quality, so that no foreign substances can be detected using normal chemical analysis methods. Their purity is at least 99% or higher according to the information.

Pure (purum) is a chemical quality designation. The product is chemically pure, i.e. it has a minimum content of 97%, unless otherwise stated.

Stabiliser Contains a stabiliser mixture which the manufacturer does not disclose.

Personal security

Delivery only to adults over 18 years. store upright!

Hand disinfectant: Simply made by yourself (analog WHO recipe)

Only suitable for hand disinfection, because after evaporation it leaves the glycerin as a lubricating film on surfaces.
BioClean is the highly efficient agent for disinfecting surfaces and drinking water.

ingredients (Cost 1 liter: CHF 7.56)

- 8.3 dl alcohol (Ethanos 96%) = e.g. Fuel from the store!
- 0.15 dl glycerin (99.5%)
- 0.4 dl hydrogen peroxide (3%)
- 1.15 dl distilled water (from the shop, e.g. for "irons" etc. Or boiled tap water, cooled down)
- For immediate use of your product: BioClean from mychem.ch klick....

Preparation in seven steps

1. Pour alcohol into a clean plastic container
2. Measure and add hydrogen peroxide in a measuring vessel (optimal measuring cylinder) (eye and skin protection!).
3. Measure glycerin and add to the solution. Glycerin is viscous and sticks to the measuring calender: Fill gradually with the previously measured water and rinse it in your detergent.
4. If available: add 12 - 18 drops of BioClean from mychem.ch (advantage: instantly destroys all germs that may still be in your agent).
5. Mix everything very well.
6. Fill your product into small plastic or glass bottles (e.g. 100 ml spray bottles are available here ...)
7. If made with BioClean: Your agent is now ready for use.
    Made without BioClean: 72 hours so that none remain ineffective.

Wear protective gear

• safety goggles
• Plastic gloves (for example Nitril) 
  
  

Further purpose

• for bleaching paper, mushrooms textiles, abtlers, bones
  
  

Important notes

Keep out of reach of children

	MYCHEM quality: MYCHEM offers the highest possible product quality and purity. It stands up to the absolute highest quality comparisons and requirements.
	before buying please note danger information
	we take small amounts of privates back for free

 own brand