Sodium chlorite is an inorganic compound that is commonly used as Oxidizing agent is used. It is primarily used in water treatment, the paper and textile industries, and in technical applications.

Applications:
• Water treatment and disinfection
• Paper and textile bleaching
• Chemical-engineering processes
• Raw material for the production of chlorine dioxide

Solution: 28% (based on total substances) or 25% (based on NaClO₂)

• Molecular formula: NaClO₂
• PubChem CID: 24451
• CAS Number: 7758-19-2 
• Other names: Sodium Chlorite (INCI name),Sodium salt of chlorous acid

Why an HDPE bottle?

HDPE (high-density polyethylene) is a high-density plastic made from PE (polyethylene). It is Resistant to sodium chlorite. Unlike glass! That is why we dispense sodium chlorite exclusively in HDPE containers.

Sodium chlorite 24–26% 100 ml technical: HDPE bottle with tamper-evident cap, child-resistant closure, and tactile warning symbol. ! No dropper !
Sodium chlorite 24–26% 250 ml technical: HDPE bottle with tamper-evident cap, child-resistant closure, and tactile warning symbol. ! No dropper !

Sodium chlorite 25% 100 ml puriss: HDPE bottle with tamper-evident cap, child-resistant closure, and tactile warning symbol. ! No dropper !
Sodium Chlorite 25% 250 ml puriss: HDPE bottle with tamper-evident cap, child-resistant closure, and tactile warning symbol. ! No dropper !

Preparation
Make sure that the Room well ventilated This is because chlorine dioxide gas is released during the chemical reaction, and you must not inhale it.
Attention Mix only small amounts, such as three drops at a time. Larger amounts produce large volumes of gas.

Implementation
Add a few drops of sodium chlorite (NaClO₂) and Hydrochloric acid (HCl) in a 1:1 ratio into a clean, dry container (not metal). The following is suitable for this: Dropper insert for our 100-ml bottles. Alternatively, you can use our Pasteur pipette Use (rinse thoroughly with water after using each chemical).
After about 45 seconds, you can add the desired amount of water and the resulting CDS Ready.
what is CDS ?

Ready-made Mychem CDS compared to the self-assessed CDS
One drop each of NaClO₂ and HCl is equivalent to the active amount in eight drops of our ready-to-use CDS.
Example: 3 drops of NaClO₂ mixed with 3 drops of HCl = 24 drops Mychem CDS

Purity
The substance obtained by mixing NaClO₂ and HCl CDS contains By-products from the raw chemicals and does not reach the Purity of our finished CDS.

The manufacturing process for our CDS is a special, elaborate Mychem's In-House Development by means of Gas Injection Processes. This guarantees an unprecedented level of purity of just a few µS/cm, comparable to ultrapure water.
The result is our CDS in its purest form.

Sodium chlorite has a virtually unlimited shelf life.
You can store sodium chlorite at room temperature, away from direct sunlight.

Be sure to keep these out of the reach of children and pets.

UFI Sodium Chlorite puriss: PV00-U0MX-H00R-GENF

UFI Technical Sodium Chlorite: C600-T03S-200S-6PYX

  GHS05 GHS07 GHS09 Hazard

H290: May be corrosive to metal.  
H302: Harmful if swallowed.
H318: Causes serious eye damage.
H373: May cause damage to organs through prolonged or repeated exposure.
H410: Very toxic to aquatic life with long-lasting effects.
P102: Keep out of the reach of children.
P280: Wear protective gloves, eye protection, and face protection.
P405: Keep under lock and key.
P305 + P351 + P338 IF IN EYES: Gently rinse with water for several minutes.
Remove any contact lenses, if possible. Continue rinsing.
P501: Return partially emptied containers to the point of sale or take them to a hazardous waste collection site.
EUH031: Releases toxic gases upon contact with acid.

Material Safety Data Sheet for Sodium Chlorite 24-26% NaClO₂ Technical Grade (MSDS)
Safety Data Sheet: Sodium Chlorite 25% NaClO₂ puriss (MSDS)

We supply customers in Switzerland and the Principality of Liechtenstein.

MYCHEM.CH's terms of delivery and payment are described in detail during the ordering process. Special delivery methods requested by our customers will be charged with a local surcharge.

Ordered items will be delivered as quickly as possible depending on availability. More precise delivery times are displayed for each item and at the end of the order process.

If an item is not available, we will inform the customer immediately. If non-compliance with a delivery or performance deadline is due to force majeure, unforeseeable obstacles or other circumstances for which we are not responsible, the deadline shall be extended accordingly. If the impossibility of delivery is due to the inability of the manufacturer or our supplier, both we and the buyer may withdraw from the contract if the agreed delivery date is exceeded by more than 3 weeks.

Delivery costs/free delivery
The delivery costs are calculated according to weight and shipping method and are shown separately in the order process.

From a net value of CHF 100.00, shipping is free of charge by "PostPack Priority" or A Mail.

General remarks
There are no delivery costs for personal collection.

Special deliveries by arrangement.

Packaging costs
The cost of standard factory packaging is included in the price. If special packaging is required or is necessary for the safe shipment of an item, the corresponding costs will be charged.

Delivery area
Our articles can only be delivered within Switzerland and Liechtenstein.

Deliveries abroad for larger quantities are subject to separate agreement.